A PVA with a slow set speed for projects requiring long assembly time.
MPA SLOW ľ Yellow
Type: Polyvinyl Acetate Emulsion
A slow setting adhesive specially formulated for room temperature bonding of wood or
similar porous substrate where a slower set time and a longer assembly time is desired. Very high heat resistance and excellent assembly time tolerance.
Directions For Use:
* Use freshly machined stock free from dirt or oil
* Apply to one side of stock with brush roller or roll spreader
* Assembly time 15 to 45 minutes depending on temperature, moisture-content, species & porosity. * Clamp time 45-120 minutes depending on conditions.
* Dead stack overnight before machining.
Water, while still wet. Dried material can be removed mechanically.
Cool temperatures 55░ to 70░ F is ideal. Use polyethylene, aluminum or fiberglass
containers. Avoid contact with iron.
Veneer Systems Inc.
100 River Rock Dr. Suite 104
Buffalo, NY 14207-2162
Toll Free - USA & Canada